Nonlinear spectral mapping-based models based on supervised learning have successfully applied for speech enhancement. However, as supervised learning approaches, a large amount of labelled data (noisy-clean speech pairs) should be provided to train those models. In addition, their performances for unseen noisy conditions are not guaranteed, which is a common weak point of supervised learning approaches. In this study, we proposed an unsupervised learning approach for speech enhancement, i.e., denoising autoencoder with linear regression decoder (DAELD) model for speech enhancement. The DAELD is trained with noisy speech as both input and target output in a self-supervised learning manner. In addition, with properly setting a shrinkage threshold for internal hidden representations, noise could be removed during the reconstruction from the hidden representations via the linear regression decoder. Speech enhancement experiments were carried out to test the proposed model. Results confirmed that the proposed DAELD could achieve comparable and sometimes even better enhancement performance as compared to the conventional supervised speech enhancement approaches, in both seen and unseen noise environments. Moreover, we observe that higher performances tend to achieve by DAELD when the training data cover more diverse noise types and signal-tonoise-ratio (SNR) levels.

In this work, we propose a Programmable Vector Memory Controller (PVMC), which boosts noncontiguous vector data accesses by integrating descriptors of memory patterns, a specialized local memory, a memory manager in hardware, and multiple DRAM controllers. We implemented and validated the proposed system on an Altera DE4 FPGA board. We compare the performance of our proposal with a vector system without PVMC as well as a scalar only system. When compared with a baseline vector system, the results show that the PVMC system transfers data sets up to 2.2× to 14.9× faster, achieves between 2.16× to 3.18× of speedup for 5 applications and consumes 2.56 to 4.04 times less energy.

In this paper, we present APMC, the Advanced Pattern based Memory Controller, that uses descriptors to support both regular and irregular memory access patterns without using a master core. It keeps pattern descriptors in memory and prefetches the complex 1D/2D/3D data structure into its special scratchpad memory. Support for irregular Memory accesses are arranged in the pattern descriptors at program-time and APMC manages multiple patterns at run-time to reduce access latency. The proposed APMC system reduces the limitations faced by processors/accelerators due to irregular memory access patterns and low memory bandwidth. It gathers multiple memory read/write requests and maximizes the reuse of opened SDRAM banks to decrease the overhead of opening and closing rows. APMC manages data movement between main memory and the specialized scratchpad memory; data present in the specialized scratchpad is reused and/or updated when accessed by several patterns. The system is implemented and tested on a Xilinx ML505 FPGA board. The performance of the system is compared with a processor with a high performance memory controller. The results show that the APMC system transfers regular and irregular datasets up to 20.4x and 3.4x faster respectively than the baseline system. When compared to the baseline system, APMC consumes 17% less hardware resources, 32% less on-chip power and achieves between 3.5x to 52x and 1.4x to 2.9x of speedup for regular and irregular applications respectively. The APMC core consumes 50% less hardware resources than the baseline system's memory controller. In this paper, we present APMC, the Advanced Pattern based Memory Controller, an intelligent memory controller that uses descriptors to supports both regular and irregular memory access patterns. support of the master core. It keeps pattern descriptors in memory and prefetches the complex data structure into its special scratchpad memory. Memory accesses are arranged in the pattern descriptors at program-time and APMC manages multiple patterns at run-time to reduce access latency. The proposed APMC system reduces the limitations faced by processors/accelerators due to irregular memory access patterns and low memory bandwidth. The system is implemented and tested on a Xilinx ML505 FPGA board. The performance of the system is compared with a processor with a high performance memory controller. The results show that the APMC system transfers regular and irregular datasets up to 20.4x and 3.4x faster respectively than the baseline system. When compared to the baseline system, APMC consumes 17% less hardware resources, 32% less on-chip power and achieves between 3.5x to 52x and 1.4x to 2.9x of speedup for regular and irregular applications respectively. The APMC core consumes 50% less hardware resources than the baseline system's memory controller.memory accesses.

Traditionally, system designers have attempted to improve system performance by scheduling the processing cores and by exploring different memory system configurations and there is comparatively less work done scheduling the accesses at the memory system level and exploring data accesses on the memory systems. In this paper, we propose a memory access pattern based controller (MAPC). MAPC organizes data accesses in descriptors, prioritizes them with respect to the number and size of transfer requests. When compared to the baseline multicore system, the MAPC based system achieves between 2.41× to 5.34× of speedup for different applications, consumes 28% less hardware resources and 13% less dynamic power.

In this work, we propose an efficient scheduler and intelligent memory manager known as AMMC (Advanced Multi-Core Memory Controller), which proficiently handles data movement and computational tasks. The proposed AMMC system improves performance by managing complex data transfers at run-time and scheduling multi-cores without the intervention of a control processor nor an operating system. AMMC has been coupled with a heterogeneous system that provides both general-purpose cores and application specific accelerators. The AMMC system is implemented and tested on a Xilinx ML505 evaluation FPGA board. The performance of the system is compared with a microprocessor based system that has been integrated with the Xilkernel operating system. Results show that the AMMC based multi-core system consumes 48% less hardware resources, 27.9% less on-chip power and achieves 6.8x of speed-up compared to the MicroBlaze-based multi-core system.

A generic multi-accelerator system comprises a microprocessor unit that schedules the accelerators along with the necessary data movements. The system, having the processor as control unit, encounters multiple delays (memory and task management) which degrade the overall system performance. This performance degradation demands an efficient memory manager and high speed scheduler, which feeds prearranged data to the appropriate accelerator. In this work we propose the integration of an efficient scheduler and an intelligent memory manger into an existing core known as PPMC (Programmable Pattern based Memory Controller), such that data movement and computational tasks can be handled proficiently. Consequently, the modified PPMC system improves performance by managing data movements and address generation in hardware and scheduling accelerators without the intervention of a control processor nor an operating system. The PPMC system is evaluated with six memory intensive accelerators: Laplacian solver, FIR, FFT, Thresholding, Matrix Multiplication and 3D-Stencil. This modified PPMC system is implemented and tested on a Xilinx ML505 evaluation FPGA board. The performance of the system is compared with a microprocessor based system that has been integrated with the Xilkernel operating system. Results show that the modified PPMC based multi-accelerator system consumes 50% less hardware resources, 32% less on-chip power and achieves approximately a 27× speed-up compared to the MicroBlaze-based system.

Reconfigurable computers have started to appear in the HPC landscape, albeit at a slow pace. Adoption is still being hindered by the design methodologies and slow implementation cycles. Recently, methodologies based on High Level Synthesis (HLS) have begun to flourish and the reconfigurable supercomputing community is slowly adopting these techniques. In this paper we took a geophysics application and implemented it on FPGA using a HLS tool called HCE. The application, Reverse Time Migration, is an important code for subsalt imaging. It is also a highly demanding code both in computationally as in its memory requirements. The complexity of this code makes it challenging to implement it using a HLS methodology instead of HDL. We study the achieved performance and compare it with hand-written HDL and also with software based execution. The resulting design, when implemented on the Altera Stratix IV EP4SGX230 and EP4SGX530 devices achieves 11.2 and 22 GFLOPS respectively. On these devices, the design was capable of achieving up to 4.2× and 7.9× improvement, respectively, over a general purpose processor core (Intel i7).