Cooperative intelligent transport systems (C-ITS) enable information to be shared wirelessly between vehicles and infrastructure in order to improve transport safety and efficiency. Delivering C-ITS services using existing cellular networks offers both financial and technological advantages, not least since these networks already offer many of the features needed by C-ITS, and since many vehicles on our roads are already connected to cellular networks. Still, C-ITS pose stringent requirements in terms of availability and latency on the underlying communication system; requirements that will be hard to meet for currently deployed 3G, LTE, and early-generation 5G systems. Through a series of experiments in the MONROE testbed (a cross-national, mobile broadband testbed), the present study demonstrates how cellular multi-access selection algorithms can provide close to 100 percent availability, and significantly reduce C-ITS transaction times. The study also proposes and evaluates a number of low-complexity, low-overhead single-access selection algorithms, and shows that it is possible to design such solutions so that they offer transaction times and availability levels that rival those of multi-access solutions.

This paper presents an outdoor IoT-based air quality monitoring testbed deployed in the city of Uppsala, Sweden. Our IoT sensing unit is designed and developed using low-cost hardware components and open source software, which makes it easy to replicate. We demonstrate that it can serve as an affordable solution for real-time measurements and has potential to complement traditional monitoring to cover larger areas. We use low-power communication based on IEEE 802.15.4, RPL, and MQTT, and achieve high end-to-end delivery ratio (>98%) in an outdoor setting. Moreover, we carry out network analysis of our testbed and provide detailed insights into its characteristics.

Information-centric networking (ICN) with its design around named-based forwarding and in-network caching holds great promises to become a key architecture for the future Internet. Many proposed ICN hop-by-hop congestion control schemes assume a fixed and known link capacity, which rarely - if ever - holds true for wireless links. Firstly, we demonstrate that although these congestion control schemes are able to fairly well utilise the available wireless link capacity, they greatly fail to keep the delay low. In fact, they essentially offer the same delay as in the case with no hop-by-hop, only end-to-end, congestion control. Secondly, we show that by complementing these schemes with an easy-to-implement, packet-train capacity estimator, we reduce the delay to a level significantly lower than what is obtained with only end-to-end congestion control, while still being able to keep the link utilisation at a high level.

Large network operators have thousands or tens of thousands of access aggregation links that they need to manage and dimension properly. Measuring and understanding the traffic characteristics on these type of links are therefore essential. What do the traffic intensity characteristics look like on different timescales from days down to milliseconds? How do the characteristics differ if we compare links with the same capacity but with different type of clients and access technologies? How do the traffic characteristics differ from that on core network links? These are the type of questions we set out to investigate in this paper. We present the results of packet level measurements on three different 1Gbit/s aggregation links in an operational IP network. We see large differences in traffic characteristics between the three links. We observe highly skewed link load probability densities on timescales relevant for buffering (i.e. 10-milliseconds). We demonstrate the existence of large traffic spikes on short timescales (10-100ms) and show their impact on link delay. We also found that these traffic bursts often are caused by only one or a few IP flows.

This paper outlines the tradeoffs involved in utilizing Information-Centric Networking (ICN) for Internet of Things (IoT) scenarios. It describes contexts and applications where the IoT would benefit from ICN, and where a host-centric approach would be better. Requirements imposed by the heterogeneous nature of IoT networks are discussed in terms of connectivity, power availability, computational and storage capacity. Design choices are then proposed for an IoT architecture to handle these requirements, while providing efficiency and scalability. An objective is to not require any IoT specific changes of the ICN architecture per se, but we do indicate some potential modifications of ICN that would improve efficiency and scalability for IoT and other applications.

We analyse two complementary datasets to quantify the latency variation experienced by internet end-users: (i) a large-scale active measurement dataset (from the Measurement Lab Network Diagnostic Tool) which shed light on long-term trends and regional differences; and (ii) passive measurement data from an access aggregation link which is used to analyse the edge links closest to the user.

We describe experiences and insights from adapting the Subversion version control system to use the network service of two information-centric networking (ICN) prototypes: OpenNetlnf and CCNx. The evaluation is done using a local collaboration scenario, common in our own project work where a group of people meet and share documents through a Subversion repository. The measurements show a performance benefit already with two clients in some of the studied scenarios, despite being done on un-optimised research prototypes. The conclusion is that ICN clearly is beneficial also for non mass-distribution applications. It was straightforward to adapt Subversion to fetch updated flies from the repository using the ICN network service. The adaptation however neglected access control which will need a different approach in ICN than an authenticated SSL tunnel. Another insight from the experiments is that care needs to be taken when implementing the heavy ICN hash and signature calculations. In the prototypes, these are done serially, but we see an opportunity for parallelisation, making use of current multi-core processors.

The existing Internet ecosystem is a result of decades of evolution. It has managed to scale well beyond the original aspirations. Evolution, though, highlighted a certain degree of inadequacies that is well documented. In this position paper we present the design considerations for a re-architected global networking architecture which delivers dissemination and non-dissemination objects only to consenting recipients, reducing unwanted traffic, linking information producers with consumers independently of the hosts involved, and connects the digital with the physical world. We consider issues ranging from the proposed object identifier/locator split to security and trust as we transition towards a Network of Information and relate our work with the emerging paradigm of publish/subscribe architectures. We introduce the fundamental components of a Network of Information, i.e., name resolution, routing, storage, and search, and close this paper with a discussion about future work.

By definition, the operation of an asynchronous power save protocol permits an arbitrary distribution of nodes' wakeup schedules. This wakeup schedule distribution creates an uncoordinated pattern of times at which nodes attempt to transmit. Intuitively, we would expect that some patterns are more (or less) favorable than others for a given traffic pattern. We investigate the impact of this wakeup pattern on network capacity and present simulation data showing that the capacity associated with the best wakeup patterns is significantly larger than that of the worst. This result not only gives insight to the behavior of such protocols, but also acts as a feasibility study showing the potential benefit of mechanisms by which nodes adapt their wakeup schedules to obtain improved performance.

The Internet consists of independent networks that belong to different administrative domains and vary in scope from personal area networks, private home networks, corporate networks to ISP and global operator networks. These networks may employ different technologies, communications mediums, addressing realms and may have widely different capabilities. The coming years will add a significant level of dynamic behavior, such as mobile nodes and moving networks, which the Internet must support. At the same time, there is a need to address the increasing levels of harmful traffic and denial-of-service attacks. The existing Internet architecture does not support dynamic behavior or secure communication to a sufficient degree. This paper outlines a node-identity-based internetworking architecture that allows heterogeneous networks to work together without loss of functionality. Some of techniques employed in this architecture include reliance on cryptographic node identifiers, identity routers and localized addressing realms.

Providing end-to-end communication in heterogeneous internetworking environments is a challenge. Two fundamental problems are bridging between different internetworking technologies and hiding of network complexity and differences from both applications and application developers. This paper presents abstraction and naming mechanisms that address these challenges in the Ambient Networks project. Connectivity abstractions hide the differences of heterogeneous internetworking technologies and enable applications to operate across them. A common naming framework enables end-to-end communication across otherwise independent internetworks and supports advanced networking capabilities, such as indirection or delegation, through dynamic bindings between named entities

We model a Web client using empirical probability distributions for user clicks and transferred data sizes. By using a heuristic threshold value to distinguish user clicks in a packet trace we get a simple method for analyzing large packet traces in order to get information about user off times and amount of data transferred due to a user click. We derive the empirical probability distributions from the analysis of the packet trace. The heuristic is not perfect, but we believe it is good enough to produce a useful Web client model. We use the empirical model to implement a Web client traffic generator. The characteristics of the generated traffic is very close to the original packet trace, including self-similar properties.

We review previous work on the applicability and performance of integrated layer processing (ILP). ILP has been shown to clearly improve computer communication performance when integrating simple data manipulation functions, but the situation has been less clear for more complex functions and complete systems. We discuss complications when applying ILP to protocol stacks, the requirements of ILP on the communication subsystem, caching aspects, the importance of the processor registers, and a model for predicting the performance of data manipulation functions. We conclude that the main drawback of ILP is its limited applicability to complex data manipulation functions. The performance to expect from an ILP implementation also depends heavily on the protocol architecture and the host system architecture.