The increasing complexity of hardware and software requires advanced development and test methodologies for modern systems on chips. This paper presents a novel approach to ARM-on-ARM virtualization within SystemC-based simulators using Linux's KVM to achieve high-performance simulation. By running target software natively on ARM-based hosts with hardware-based virtualization extensions, our method eliminates the need for instruction-set simulators, which significantly improves performance. We present a multicore SystemC-TLM-based CPU model that can be used as a drop-in replacement for an instruction-set simulator. It places no special requirements on the host system, making it compatible with various environments. Benchmark results show that our ARM-on-ARM-based virtual platform achieves up to 10 x speedup over traditional instruction-set-simulator-based models on compute-intensive workloads. Depending on the benchmark, speedups increase to more than 100 x.

SystemC TLM-2.0 is currently the industry standard for simulating full Systems-on-a-Chip (SoCs). Although SystemC is designed to simulate the behavior of complex, parallel systems, the simulation itself is by default single-threaded. We present a technique to overcome this performance limitation by parallelizing the CPU model of a SystemC-TLM-2.0-based system-level simulator, a so-called Virtual Platform (VP). Our solution is fully compliant with the SystemC standard. To further increase the performance, we developed algorithms for asynchronous DMI pointer caching and we introduced a new tunable parameter called async_rate. This parameter controls the frequency used to annotate timing information to SystemC.

Fast simulation of Virtual Platforms (VPs) is a cornerstone of modern hardware/software co-development. A particular challenge, especially if target and host Instruction Set Architecture (ISA) are different, is the simulation of Floating Point (FP) instructions. Although FP arithmetic was standardized in 1985 by IEEE 754, extensive revisions and lax definitions have led to a variety of different implementations. Thus, the question we seek to answer in this work is: How can FP instructions be efficiently simulated, if the FP arithmetic provided by the host ISA is semantically different?In this paper, we first provide a comprehensive overview of methods used in academia and open-source projects. Subsequently, we propose our own strategy for emulating RISC-V FP instructions on an x64 host. Our idea is to leverage the host’s FPU and handle corner cases in software. In contrast to other works, we cover the full spectrum of arithmetic FP instructions and present innovative approaches, especially for the computation of division and square root. Moreover, we show how exception flags and a non-default rounding mode can be handled efficiently. Our approach achieves a 3× speedup in common FP benchmarks compared to purely software-based solutions. When comparing our method against more sophisticated methods, as for example used in QEMU, we achieve a 50% performance gain for non-default rounding modes.

The growing complexity of modern embedded systems poses a challenge to designers of virtual platforms, as the increasing number of processors causes simulation speed to degrade. To remain viable as design tools, virtual platforms must use highly abstracted modeling levels or deploy parallel simulation technologies to keep performance up. With multi-core PC workstations being widely available today, parallel simulation seems an attractive solution. However, the introduction of concurrency into a virtual platform simulator complicates the construction of synchronization mechanisms of the simulated models. Therefore, this work presents a modeling approach for concurrent LL/SC based on SystemC/TLM. This facilitated the construction of a parallel simulator for a quad-core OpenRISC based system, gaining a performance speedup of 3.4x over a regular sequential simulator.

With increasing system size and complexity, designers of embedded systems face the challenge of efficiently simulating these systems in order to enable target specific software development and design space exploration as early as possible. Today's multicore workstations offer enormous computational power, but traditional simulation engines like the OSCI SystemC kernel only operate on a single thread, thereby leaving a lot of computational potential unused. Most modern embedded system designs include multiple processors. This work proposes SCope, a SystemC kernel that aims at exploiting the inherent parallelism of such systems by simulating the processors on different threads. A lookahead mechanism is employed to reduce the required synchronization between the simulation threads, thereby further increasing simulation speed. The virtual prototype of the European FP7 project EURETILE system simulator is used as demonstrator for the proposed work, showing a speedup of 4.01× on a four core host system compared to sequential simulation.

EURETILE investigates foundational innovations in the design of massively parallel tiled computing systems by introducing a novel parallel programming paradigm and a multi-tile hardware architecture. Each tile includes multiple general-purpose processors, specialized accelerators, and a fault-tolerant distributed network processor, which connects the tile to the inter-tile communication network. This paper focuses on the EURETILE software design flow, which provides a novel programming environment to map multiple dynamic applications onto a many-tile architecture. The elaborated high-level programming model specifies each application as a network of autonomous processes, enabling the automatic generation and optimization of the architecture-specific implementation. Behavioral and architectural dynamism is handled by a hierarchically organized runtime-manager running on top of a lightweight operating system. To evaluate, debug, and profile the generated binaries, a scalable many-tile simulator has been developed. High system dependability is achieved by combining hardware-based fault awareness strategies with software-based fault reactivity strategies. We demonstrate the capability of the design flow to exploit the parallelism of many-tile architectures with various embedded and high performance computing benchmarks targeting the virtual EURETILE platform with up to 192 tiles.

Architects and developers use virtual prototypes of computer systems to receive early feedback on hardware design decisions as well as to develop and debug system software. This is facilitated by the comprehensive inspection capabilities virtual prototypes offer. For virtual prototypes, execution speed is crucial to support the users' productivity. Parallel simulation techniques are employed to offset the speed impact of the increasing number of cores that need to be simulated in virtual prototypes of parallel and embedded systems. SystemC is the de facto industry standard library for virtual platform modeling. Since currently no parallel SystemC library is commonly available, typical SystemC models are coded for execution in sequential simulation environments. Simply putting such models into parallel simulators may lead to thread-safety issues and may additionally cause nondeterministic simulator behavior. This article proposes a methodology to support simulation creators to face the challenge of integrating such legacy models into parallel SystemC environments. The feasibility of the proposed method is evaluated by parallelizing the latest instance of the EU FP7 project EURETILE embedded platform simulator. Using legaSCi , on four host processor cores a speedup of 2.13× is demonstrated, without having to change the individual models of the simulator.