We present the novel micro-architectural features, supported by an innovative and novel pre-silicon methodology in the design of POWER10. The resulting projected energy efficiency boost over POWER9 is 2.6x at core level (for SPECint) and up to 3x at socket level. In addition, a new feature supporting inline AI acceleration was added to the POWER ISA and incorporated into the POWER10 processor core design. The resulting boost in SIMD/AI socket performance is projected to be up to 10x for FP32 and 21x for INT8 models of ResNet-50 and BERT-Large. In this paper, we describe the novel methodology deployed and used not only to obtain these efficiency boosts for traditional workloads, but also to infuse AI/ML/HPC capability directly into the POWER10 core.

This article consists only of a collection of slides from the author's conference presentation.

Lossless data compression is highly desirable in enterprise and cloud environments for storage and memory cost savings and improved utilization I/O and network. While the value provided by compression is recognized, its application in practice is often limited because it's a processor intensive operation resulting low throughput and high elapsed time for compression intense workloads.The IBM POWER9 and IBM z15 systems overcome the shortcomings of existing approaches by including a novel on-chip integrated data compression accelerator. The accelerator reduces processor cycles, I/O traffic, memory and storage footprint of many applications practically with zero hardware cost. The accelerator also eliminates the cost and I/O slots that would have been necessary with FPGA/ASIC based compression adapters. On the POWER9 chip, a single accelerator uses less than 0.5% of the processor chip area, but provides a 388x speedup factor over the zlib compression software running on a general-purpose core and provides a 13x speedup factor over the entire chip of cores. On a POWER9 system, the accelerators provide an end-to-end 23% speedup to Apache Spark TPC-DS workload compared to the software baseline. The z15 chip doubles the compression rate of POWER9 resulting in even much higher speedup factors over the compression software running on general-purpose cores. On a maximally configured z15 system topology, on-chip compression accelerators provide up to 280 GB/s data compression rate, the highest in the industry. Overall, the on-chip accelerators significantly advance the state of the art in terms of area, throughput, latency, compression ratio, reduced processor utilization, power/energy efficiency, and integration into the system stack.This paper describes the architecture, and novel elements of the POWER9 and z15 compression/decompression accelerators with emphasis on trade-offs that made the on-chip implementation possible.

This article consists of a collection of slides from the author's conference presentation.